304 North Cardinal St.
Dorchester Center, MA 02124
There’s something counterintuitive about it, right? Plug a USB stick into a giant digital player alongside turntables. Or plug the turntables into a computer. What if the USB stick … was the actual player? In the age of rapid miniaturization, why hasn’t this happened yet?
Well, thanks to an open source project, it has happened (very nearly, anyway). It’s called PiDeck. And it radically reduces the amount of gear you need. You’ll still need an audio interface with phono input to connect the turntable, plus the (very small, very cheap) Raspberry Pi. But that’s just about it.
Connect your handheld computer into a turntable, add a control vinyl, and you’re ready to go. So your entire rig is only slightly larger than the size of two records and some gear the size of your two hands.
You have a rock-solid, Linux-based, ultra-portable rig, a minimum of fuss, essentially no space taken up in the booth – this all makes digital vinyl cool again.
It works with USB sticks (even after you yank them out):
And you can scratch:
Their recommended gear (touchscreens these days can be really compact, too)
- A recent Raspberry Pi (only Pi 3 model B tested so far) and power supply. First generation Raspberry Pi’s are not supported, sorry
- Touchscreen (single-touch is enough), or a HDMI monitor and keyboard
- Stereo, full-duplex I2S or USB soundcard with a phono input stage, or line input and an external pre-amp, soundcard must be supported by ALSA
- Micro SD card for the software, at least 2GB in size, and an adaptor to flash it with
- Control vinyl, Serato CV02 pressing or later recommended
- USB stick containing your favourite music. FLAC format is recommended (16-bit 44100Hz format tested)
- Non-automatic record player that can hold speed, with a clean, sharp stylus. It helps scratching if the headshell and arm are adjusted correctly
- Slipmat, made from felt or neoprene
- Sheet of wax paper from the kitchen drawer, to go under the slipmat
Previously from this same crew (more just a fun proof of concept / weird way of DJing!):
Check out the project site:
And you can download this now – for free.
Developer Daniel James writes us with more details on what this whole thing is about:
Chris (in cc) and I have been working on the project in spare time for a couple of months, here on the Isle of Wight. Chris built the hardware prototype and did most of the work on the custom Debian distro.
The idea behind the PiDeck project is to combine the digital convenience of a USB stick with the hands-on usability of the classic turntable, in a way which is affordable and accessible. The parts cost (at retail) for each PiDeck device is currently about £150, not including a case or control vinyl. There is no soldering to do; the hardware screws and clips together.
I used to run DJ workshops for young people, and found that while the kids were really happy to get their hands on the decks, a lot of them were put off by having to use the laptop as well, especially the younger kids and the girls. The teenage boys would tend to crowd around the laptop and take over.
Then there’s the performance aspect of real turntables which some digital controllers lack, and the sneaking suspicion that the computer is really doing the mixing, or worse still, just running through a
playlist. PiDeck doesn’t have any mixing, sync or playlist features, so the DJ can take full credit (or blame) for the sound of the mix.
We’ve deliberately put no configurable options in the interface, and there are no personal files stored on the device. This helps ensure the PiDeck becomes part of the turntable and not unique, in the way that a laptop and its data is. This makes the PiDeck easier to share with other DJs, so that there should be no downtime between sets, and should make it easier for up-and-coming DJs to get a turn on the equipment. If a PiDeck breaks, it would be possible to swap it out for another PiDeck device and carry right on.
Although the DJ doesn’t have any settings to deal with, the software is open source and fully hackable, so we’re hoping that a community will emerge and do interesting things with the project. For example, multiple PiDeck devices could be networked together, or used to control some other system via the turntable.
Yeah – this could change a lot. It’s not just a nerdy proof of concept: it could make turntablism way more fun.
The post PiDeck makes a USB stick into a free DJ player, with turntables appeared first on CDM Create Digital Music.
from Create Digital Music http://ift.tt/2enhbto